Body | Height |
Positive <numeric value>
- Sets height of sprinkler body, usually the length of straight pipe from End1 of upright sprinkler
|
Body Length |
Positive <numeric value>
- Sets length of sprinkler body, usually the length of straight pipe from End1 of sidewall sprinkler.
|
Cap | Length |
Positive <numeric value>
- Sets the length of the Pip Cap when Cap Selection is With Cap.
|
Cap Selection |
- 1-With Cap - adds body cap around sprinkler head.
- 2-Without Cap - without body cap around sprinkler head.
- Toggles setting cap around sprinkler head stowed above wrench.
|
Cap | Width |
Positive <numeric value>
- Sets the width of the Pip Cap when Cap Selection is With Cap.
|
Cell Library |
<cell library file name>
- Library file name for device cells.
|
Cell Symbol Name |
<cell name>;scale=<numeric value>
- Sets the model cell displayed to the device.
- Scale entry fits cell proportionally to extents of device.
|
Connection 1 | Length (L1) |
Positive <numeric value>
|
Connection | End Type |
fl -<numeric value>
- Sets and sizes end with a flange connection.
m -<numeric value>
- Sets and sizes end with a male connection.
fe -<numeric value>
- Sets and sizes end with a female connection.
Separate End Type entries for each End Spec with a semi colon. Example: fl-2; creates a flange at End1 with size 2, and fe-.13; creates a female connection at End1 with an overall reduction of component's dimensions of .13
|
Deflector Thickness |
Positive <numeric value>
- Sets the thickness to the metal piece of the deflector.
|
Deflector Width |
Positive <numeric value>
- Sets the diameter for the flower, or gear-shaped deflector at one end of the sprinkler head.
|
Damper | Diameter |
Positive <numeric value>
- Sets outside diameter of disk attached to base of sprinkler pipe.
|
Flow Rate |
<Positive numeric value>
- Sets a value for the amount of flow through sprinkler head. Used to calculate overall flow rate during analysis operations.
|
Glass Bulb Width |
Positive <numeric value>
- Sets the nominal diameter to fit the glass bulb used to release parabolic spray pattern.
|
Guard Length |
Positive <numeric value>
- Sets length of guard attached perpendicular to the disk of sidewall sprinkler.
|
Guard Offset |
Positive <numeric value>
- Sets longitudinal position of guard along disk of sidewall sprinkler. Zero offset aligns middle of guard at edge of disk
|
Guard Width |
Positive <numeric value>
- Sets width of guard attached perpendicular to the disk of sidewall sprinkler.
|
Height |
Positive <numeric value>
- Sets the overall height of the sprinkler head assembly.
|
Inlet | Outer Diameter |
Positive <numeric value>
|
Setting Type |
- 1-Extended - Sprinkler head below body cap.
- 2-Recessed - Sprinkler head recessed down.
- Sets the sprinkler head position.
|
Tag |
<alpha-numeric characters>
- Sets tag value visible in output of drawing composition in dynamic view. Example; Upright, Sidewall for types of sprinkler.
|
Wrench Size |
Positive <numeric value>
- Sets the width of the hex-shaped wrench boss.
|